【摘要】：在快速成型工藝中,采用光固化成型和熔融沉積成型進行實體制造時需要添加支撐,然而添加支撐不合理時會造成精度損失。另外不論是CAD模型、STL模型還是點云模型,當成型面與成型方向存在一定角度時就會產生臺階效應,降低成型精度。綜合以上兩方面的考慮,提出了基于任意分層方向的點云模型等厚分層算法,使用MATLAB軟件實現本算法并進行了模擬實驗,實驗證明本算法在一定程度上降低了添加支撐不合理和臺階效應引起的精度損失。最后本文引入了模型的失真評價指數來進一步佐證本算法的可靠性。
[Abstract]:In the rapid prototyping process, it is necessary to add the support when the light curing molding and the melt deposition forming are used in the solid manufacturing, but the precision will be lost when the support is not reasonable. In addition, no matter the CAD model, STL model or point cloud model, when there is a certain angle between the forming surface and the forming direction, the step effect will be produced and the forming accuracy will be reduced. Considering the above two aspects, an equal thickness delamination algorithm of point cloud model based on arbitrary stratification direction is proposed. The algorithm is implemented by using MATLAB software and the simulation experiment is carried out. Experiments show that the proposed algorithm can reduce the loss of precision caused by unreasonable support and step effect to some extent. Finally, the distortion evaluation index of the model is introduced to further prove the reliability of the algorithm.
【作者單位】： 內蒙古科技大學機械工程學院;
【基金】：內蒙古自治區自然科學基金資助項目(2017MS(LH)0530) 內蒙古自治區高等學校研究項目(NJZY16167)
【分類號】：TH16
，

本文編號：2404727