本文選題：回歸分析 + 智能減壓閥　； 參考：《湖南大學學報(自然科學版)》2017年08期

【摘要】：智能自力式減壓閥(簡稱智能減壓閥)的膜片尺寸對控制部分的密封性能會產生重要影響,進而影響閥門的壓力波動范圍、壽命、功耗等性能參數.本文提出了一種智能減壓閥膜片尺寸優化設計方法,即依據力平衡方程建立智能減壓閥壓力相關性的理論模型,通過流動實驗和實時采樣獲取原始數據,以此為基礎進行回歸分析建立實際數學模型,采用有約束條件的最小值優化模型對膜片尺寸進行優化.優化結果表明:采用優化后的膜片尺寸,壓差和減少了30%,最大壓差極值減少了7.7%,最小壓差極值減少了39.6%.這對有效降低控制系統漏率起到了有益的作用.
[Abstract]:The size of the diaphragm of the intelligent self-operated pressure reducing valve will have an important impact on the sealing performance of the control part, and then affect the pressure fluctuation range, life, power consumption and other performance parameters of the valve. In this paper, an optimal design method of diaphragm size for intelligent pressure reducing valve is proposed, that is, the theoretical model of pressure dependence of intelligent pressure reducing valve is established according to force balance equation, and the original data are obtained by flow experiment and real time sampling. On the basis of regression analysis, the actual mathematical model is established, and the membrane size is optimized by the minimum optimization model with constraints. The optimization results show that the optimum diaphragm size, pressure difference and pressure difference are reduced by 30%, the maximum pressure difference extreme value is reduced by 7.7%, and the minimum pressure difference extremum value is reduced by 39.6%. This can effectively reduce the leakage rate of the control system.
【作者單位】： 湖南大學機械與運載工程學院;湖南省特大口徑電站閥門工程技術研究中心;
【基金】：國家科技重大專項資助項目(2011ZX07412-001)~~
【分類號】：TH134
，

本文編號：1822615