【摘要】：本文對M公司導入可靠性工程方法的原因、過程和成果進行了系統的論述分析,主要內容包括以下幾個方面:第一,介紹了可靠性工程方法的研究進展和現狀;第二、分析了M公司在2014年前質量與可靠性方面存在的問題,以及解決這些問題的思路,即系統導入可靠性工程方法;第三、對M公司采用的可靠性工程方法的具體策略進行了系統的論述分析,并給出了兩個典型示例;第四、對M公司導入可靠性工程方法后取得的成果和收益進行了詳細分析。通過本文的論述分析可以發現,可靠性工程方法引入的全生命周期可靠性管理對全面質量管理在時間上的進行了延展,也大大的豐富了質量管理的內容。通過應用可靠性工程方法,不僅解決了M公司2014年前在質量與可靠性方面存在的問題,而且在人員能力、組織和體系、產品品質、公司口碑等方面都取得了一批成果,并通過迭代升級實現持續的改善和提升。本文總結歸納的可靠性提升管理策略,具有相對低成本、見效較快以及可行性好等特點,適用于其他企業和行業的推廣應用,對于提高中國產品的可靠性乃至中國制造的競爭力都具有一定的參考價值,具有較大的社會和經濟意義。
[Abstract]:In this paper, the reasons, processes and achievements of introducing reliability engineering methods in M Company are systematically discussed and analyzed. The main contents include the following aspects: first, the research progress and present situation of reliability engineering methods are introduced; Secondly, the paper analyzes the problems in quality and reliability of M Company before 2014, and the way to solve these problems, that is, introducing reliability engineering method into the system; Thirdly, the concrete strategy of reliability engineering method adopted by M Company is systematically discussed and analyzed, and two typical examples are given. Fourthly, the achievements and benefits obtained by M Company after the introduction of reliability engineering method are analyzed in detail. Through the discussion and analysis of this paper, it can be found that the whole life cycle reliability management introduced by the reliability engineering method extends the time of total quality management, and greatly enriches the content of quality management. By applying the reliability engineering method, not only the problems existing in the quality and reliability of M Company before 2014 are solved, but also a number of achievements have been made in personnel ability, organization and system, product quality, company reputation, etc. And through iterative upgrade to achieve continuous improvement and improvement. This paper summarizes the reliability promotion management strategy, which has the characteristics of relatively low cost, quick effect and good feasibility. It is suitable for other enterprises and industries to promote and apply. It has certain reference value for improving the reliability of Chinese products and the competitiveness of Chinese manufacture, and has great social and economic significance.
【學位授予單位】：廣東財經大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：F426.6;F273.2

【參考文獻】

相關期刊論文 前10條

1 夏麗嬌;;型號可靠性試驗工作思路[J];電信網技術;2016年09期

2 賈利民;林帥;;系統可靠性方法研究現狀與展望[J];系統工程與電子技術;2015年12期

3 張根保;郭書恒;;“數控機床可靠性技術”專題(十三) 可靠性試驗技術[J];制造技術與機床;2015年07期

4 何宇廷;高潮;;基于試驗數據與使用數據融合的產品壽命可靠性分析方法[J];航空工程進展;2015年02期

5 高軍;王華偉;;考慮多失效模式的復雜系統運行可靠性評估[J];計算機集成制造系統;2015年06期

6 謝里陽;;機械可靠性理論、方法及模型中若干問題評述[J];機械工程學報;2014年14期

7 張義民;孫志禮;;機械產品的可靠性大綱[J];機械工程學報;2014年14期

8 張根保;李冬英;;數控機床可靠性方法論:8341工程[J];制造技術與機床;2014年04期

9 張曉潔;王強;李政;;一種電子產品的可靠性評估方法[J];電子產品可靠性與環境試驗;2014年01期

10 張根保;李冬英;劉杰;柳劍;;面向不完全維修的數控機床可靠性評估[J];機械工程學報;2013年23期

相關碩士學位論文 前1條

1 石雄毅;MD公司的中央空調質量可靠性提升項目可行性分析[D];華南理工大學;2015年

，

本文編號：2303770