本文關鍵詞：江蘇省產業結構升級測定研究　出處：《安徽財經大學》2014年碩士論文　論文類型：學位論文

  更多相關文章： 產業結構 創新驅動 全產業體系

【摘要】：改革開放以來,中國經濟取得了巨大的發展,但是中國的發展一直是扮演著西方歐美國家的制造工廠的角色,其實質是過剩產能被西方所吸收,與發達國家相比,中國在國際產業分工與協作中處在較低的層次上,產業附加值不高。2008年金融危機爆發的影響隨即波動到中國,作為中國東部地區經濟最為發達的地區之一的江蘇省受到的沖擊也較為顯著,實體經濟發展受到嚴重影響。因此,產業轉型升級到了刻不容緩的地步。目前,國內對于產業結構升級路徑方面的研究比較多,對于產業結構升級測定方面的研究嚴重不足,因此,對江蘇省產業結構升級進行測定,指明江蘇省產業結構升級的方向具有重要意義。 本文結合實際情況,首先分析江蘇省產業結構現狀：江蘇省三大產業間結構趨于合理,但第三產業的比重明顯偏低,第三產業水平系數也處于一個相對較低的水平上；江蘇省處于工業化后期,正是處在產業結構調整升級的階段。運用產業結構水平測度模型,對江蘇省產業結構升級進行測定,得出如下分析結果：第二產業內部輕、重工業發展齊頭并進,但新興技術密集型工業比例還太少；第三產業內部傳統服務業仍占據主要地位,總體上,江蘇省產業結構趨于合理,但還有升級空間。 根據現狀分析和測定分析,本文提出了影響江蘇省產業結構升級的五大因素,即供給因素、技術創新因素、需求因素、對外開放和外部沖擊,并對江蘇省產業結構升級進行了實證分析,從分析結果來看,供給因素、技術創新因素和需求因素對江蘇省產業結構升級影響較為顯著。 最后,針對影響因素,本文提出了促進江蘇省產業進一步升級的政策建議：大力實施創新驅動戰略、建立健全現代產業體系、建設人才強省。
[Abstract]:Since the reform and opening up, China's economy has made great progress, but the development of China has been playing the role of manufacturing plants in Western Europe and the United States, the essence of which is that excess capacity is absorbed by the West. Compared with the developed countries, China is at a lower level in the international industrial division and cooperation, and the industrial added value is not high. In 2008, the impact of the financial crisis immediately fluctuated to China. As one of the most developed areas in the east of China, Jiangsu Province has been affected significantly, and the development of real economy has been seriously affected. Therefore, the industrial transformation has been upgraded to the point of urgency. At present. There are many researches on the path of industrial structure upgrading in China, and there is a serious lack of research on the measurement of industrial structure upgrading. Therefore, the measurement of industrial structure upgrading in Jiangsu Province is carried out. It is of great significance to point out the direction of industrial structure upgrading in Jiangsu Province. Combined with the actual situation, this paper first analyzes the current situation of industrial structure in Jiangsu Province: the structure of the three major industries in Jiangsu Province tends to be reasonable, but the proportion of the tertiary industry is obviously low. The tertiary industry level coefficient is also in a relatively low level; Jiangsu Province is in the late stage of industrialization, which is in the stage of industrial structure adjustment and upgrading. Using the industrial structure level measurement model, the industrial structure upgrade of Jiangsu Province is measured. The results are as follows: the second industry is light inside and the heavy industry develops with each other, but the proportion of emerging technology-intensive industry is too small; In general, the industrial structure of Jiangsu Province tends to be reasonable, but there is room for upgrading. According to the analysis and analysis of the present situation, this paper puts forward five factors that affect the upgrading of industrial structure in Jiangsu Province, that is, supply factor, technological innovation factor, demand factor, opening to the outside world and external shock. An empirical analysis is made on the upgrading of industrial structure in Jiangsu Province. The results show that the factors of supply, technological innovation and demand have a significant impact on the upgrading of industrial structure in Jiangsu Province. Finally, in view of the influence factors, this paper puts forward some policy suggestions to promote the further upgrading of Jiangsu's industry: vigorously implement the innovation-driven strategy, establish and perfect the modern industrial system, and build a strong province with talents.
【學位授予單位】：安徽財經大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：F127

【參考文獻】

相關期刊論文 前10條

1 葛新元,王大輝,袁強,方�？�;中國經濟結構變化對經濟增長的貢獻的計量分析[J];北京師范大學學報(自然科學版);2000年01期

2 丁煥峰;孫潑潑;;中國產業升級測度與策略分析[J];商業研究;2010年05期

3 江小涓;產業結構優化升級:新階段和新任務[J];財貿經濟;2005年04期

4 孔小紅;調整和提升安徽產業結構的思考[J];財貿研究;2004年05期

5 徐德云;;產業結構均衡的決定及其測度:理論解釋及驗證[J];產業經濟研究;2011年03期

6 徐德云;;產業結構升級形態決定、測度的一個理論解釋及驗證[J];財政研究;2008年01期

7 杜傳忠;郭樹龍;;中國產業結構升級的影響因素分析——兼論后金融危機時代中國產業結構升級的思路[J];廣東社會科學;2011年04期

8 何德旭;姚戰琪;;中國產業結構調整的效應、優化升級目標和政策措施[J];中國工業經濟;2008年05期

9 張其仔;;比較優勢的演化與中國產業升級路徑的選擇[J];中國工業經濟;2008年09期

10 陳海波;朱華麗;劉潔;;江蘇居民消費結構變動對產業結構升級影響的協整分析[J];工業技術經濟;2012年02期

，

本文編號：1375957