本文選題：電能計量裝置遙測系統 + 設計與建設��； 參考：《電子科技大學》2013年碩士論文

【摘要】：針對目前人工管理模式下的水電氣費用監督管理形式的各大人為因素造成的弊端，為了有效的降低個人主觀觀念在抄表收費的過程中存在的失誤，通過運用儀器儀表進行對生活中的自來水、天熱氣、電力等能源進行監控，對其進行數據的采集及信息的處理，用以科學可持續的理念來解決以往過程中的弊端。與此同時，，我國在自動抄表領域的技術發展相對落后，隨著改革開放的步法不斷深入推進，以及能源使用管理市場體制的不斷深入改革，就智能化的自動抄表技術有待實質性的提高，和現實的研究意義。 電能計量裝置遙測系統對各計量點電能數據自動采集、存儲和處理，可為電力市場系統、用電營業系統、能量管理系統等提供準確、可靠的電量數據，為用電管理、電網管理、電力建設、電力調度、設備管理和電網分析提供了科學的依據，為今后電力市場的商業化運作提供強有力的技術支持。為適應電力市場發展改革及日常電能量采集統計、線損計算的需要，建立一套穩定可靠實用的電能計量裝置遙測系統已成為重要的研究課題。 本文結合廣安電業局的實際情況，充分利用現代計算機技術及通信技術，對電能計量裝置遙測系統進行設計與建設。該系統建成后，運行穩定可靠，功能強大，實用化程度高，這些建設經驗具有實際的參考價值。 本文系統介紹了電能計量遙測裝置系統的功能規劃設計、主要子系統的功能及測試方法。本文的主要工作如下： 1、確定系統基本框架，對系統軟硬件設備進行選型。 2、對電能計費系統主站軟件進行功能劃分及功能概要設計，建立系統構架，為系統開發提供依據及標準。 3、安裝主站系統，對各功能模塊進行測試。 4、完成廠站端及通信通道建設，并與主站系統進行聯調，并通過現場驗收。
[Abstract]:In view of the defects caused by all the adults in the mode of supervision and management of water and electrical expenses under the current artificial management mode, in order to effectively reduce the errors in the charge of the meter reading, the instruments are used to monitor and monitor the energy of the water, the hot gas, the electricity and so on in the life. At the same time, the technological development of our country is relatively backward in the field of automatic meter reading. With the continuous deepening of the pace of reform and opening up, and the continuous deepening reform of the energy use management market system, the intelligent automatic meter reading technology is applied to the automatic meter reading technology. It needs substantial improvement and practical significance.
The telemetry system of electric energy metering device automatically collects, stores and processes the power data of each measurement point. It can provide accurate and reliable electricity data for power market system, electric business system, energy management system and so on. It provides scientific basis for power management, power grid management, electric power construction, power adjustment, equipment management and power grid analysis. The commercialized operation of the post power market provides strong technical support. In order to adapt to the development and reform of the electric power market and the daily electric energy collection and statistics and the need of the line loss calculation, a set of reliable and practical telemetering system for electric energy metering devices has become an important research topic.
According to the actual situation of Guang'an Electric Power Bureau, this paper makes full use of modern computer technology and communication technology to design and construct the telemetering system of electric energy metering device. After the system is built, the operation is stable, reliable, powerful and practical, and these construction experiences have practical reference value.
This paper introduces the function planning and design of the telemetry system of electric energy metering, the functions and testing methods of the main subsystems.
1, determine the basic framework of the system and select the hardware and software of the system.
2, the function division and function outline design of the master station software of the electric energy accounting system are established, and the system framework is established to provide the basis and standard for the development of the system.
3, install the master station system to test the various functional modules.
4, we will complete the construction of the plant terminal and communication channel, and coordinate with the master station system, and accept the site.
【學位授予單位】：電子科技大學
【學位級別】：碩士
【學位授予年份】：2013
【分類號】：TM933.4;TM764

【參考文獻】

相關期刊論文 前3條

1 王翼南;智能電參數測量儀原理與設計[J];電測與儀表;1997年11期

2 龍軍;電能表中電氣參數準確測量算法[J];電工技術雜志;2003年11期

3 馬磊;基本電量的微機測試系統[J];儀表技術;1998年03期

本文編號：1962985