新型現代建筑各結構形式抗震性能對比初探
發布時間:2018-09-01 08:54
【摘要】:通過收集軟件模擬分析及振動臺試驗中各結構形式的典型多高層新型現代建筑(如框架、框剪、筒體等結構形式)的相關數據。將這些資料根據結構類型分類整理,并根據層間位移角等指標,分別得到不同結構類型建筑依據遭遇烈度的房屋破壞比。最后通過MATLAB等軟件對比分析得到這些建筑的抗震性能對比結果。
[Abstract]:Through the software simulation analysis and shaking table test of the typical multi-high-rise modern buildings (such as frame shear tube and other structural forms) related data are collected. These data are classified according to the structure type, and according to the index of displacement angle between floors, the failure ratio of buildings with different structure types is obtained according to the intensity of buildings. Finally, the comparison results of seismic performance of these buildings are obtained by MATLAB and other software.
【作者單位】: 昆明理工大學工程抗震研究所;昆明理工大學建筑工程學院;
【分類號】:TU352.11
,
本文編號:2216693
[Abstract]:Through the software simulation analysis and shaking table test of the typical multi-high-rise modern buildings (such as frame shear tube and other structural forms) related data are collected. These data are classified according to the structure type, and according to the index of displacement angle between floors, the failure ratio of buildings with different structure types is obtained according to the intensity of buildings. Finally, the comparison results of seismic performance of these buildings are obtained by MATLAB and other software.
【作者單位】: 昆明理工大學工程抗震研究所;昆明理工大學建筑工程學院;
【分類號】:TU352.11
,
本文編號:2216693
本文鏈接:http://www.sikaile.net/jingjilunwen/jianzhujingjilunwen/2216693.html
最近更新
教材專著