本文選題：消化池　切入點：圓柱形　出處：《建筑結構》2016年S1期

【摘要】：基于數值模擬技術針對圓柱形消化池常見的五種工況進行了受力分析,并對計算結果進行了對比。研究結果表明,施加預應力后,池壁整個截面在各種工況下皆處于環向受壓狀態,可以保證結構防滲防漏的設計要求;并且通過五種工況的對比分析還可得,靜水壓力及壁面溫差是結構設計中的控制荷載。所得結論可為相關設計人員提供參考。
[Abstract]:Based on the numerical simulation technique, the stress of the cylindrical digester is analyzed under five common conditions, and the calculated results are compared.Hydrostatic pressure and wall temperature difference are the control loads in structural design.The conclusions can be used as reference for related designers.
【作者單位】： 山東省建筑科學研究院;
【分類號】：TU318
，

本文編號：1700887