發布時間：2018-01-16 13:07

  本文關鍵詞：智能家居終端控制系統的研究　出處：《南京林業大學》2015年碩士論文　論文類型：學位論文

  更多相關文章： 智能家居 ARM 嵌入式 Linux內核

【摘要】：隨著社會經濟的發展,人們的生活節奏也隨之變得越來越快,尤其是生活在城市里的人們,每天都面臨著各種各樣的生活壓力。家是人們放松、調節、緩解生活壓力的地方。為了方便人們對家的管理,更好地享受家?guī)淼拿篮蒙?智能家居控制管理系統應運而生。隨著視頻監控、媒體播放等對處理器要求較高的技術不斷應用到智能家居控制管理系統中,傳統的ARM 9、ARM11處理器不能滿足智能家居終端的需求,加之傳統智能家居控制系統使用基于非開源的WindowsCE商業操作系統,且終端人機交互不友好,因此本文設計并實現了基于ARM Cortex A8的智能家居終端控制系統。經過調試,系統正常工作,達到預期設計的目標。在本課題設計的過程中主要完成了以下工作:1.完成了智能家居終端控制系統硬件平臺的設計,包括USB攝像頭模塊、PM2.5模塊、溫度檢測模塊、報警器模塊、智能終端的硬件設計。2.完成了嵌入式Linux系統的內核裁剪與移植、uboot系統設計與移植、根文件系統的設計,設計了終端友好圖形操作界面。3.完成了LED燈、AD轉換、報警器、空調、排風扇硬件驅動模塊的編寫,控制服務程序設計,以及網卡驅動、攝像頭驅動模塊的加載。實現了系統時鐘顯示、CPU頻率、空閑內存、磁盤剩余空間參數的獲取。設計了PC遠程登陸智能終端的界面,并實現了遠程登錄功能。4.完成了智能終端對室內LED燈開關控制,溫度、PM2.5值采集與調節控制、視頻監控功能以及各功能模塊的調試。
[Abstract]:With the development of social economy, people's rhythm of life has become faster and faster, especially people living in the city, face a variety of daily life pressure. To ease the pressure of life. In order to facilitate the management of people home, better enjoy the good life brought home, intelligent home control management system came into being. With the video surveillance. Media playback and other high processor requirements technology has been applied to the smart home control management system, the traditional ARM 9 ARM11 processor can not meet the needs of smart home terminals. In addition, the traditional smart home control system uses WindowsCE commercial operating system based on non-open source, and the terminal human-computer interaction is not friendly. Therefore, this paper designs and implements the intelligent home terminal control system based on ARM Cortex A8. After debugging, the system works normally. Achieve the desired design objectives. In the course of the design of this topic, the following work has been accomplished: 1. The hardware platform of the intelligent home terminal control system, including the USB camera module, has been designed. PM2.5 module, temperature detection module, alarm module, intelligent terminal hardware design. 2. Completed the embedded Linux system kernel clipping and transplantation of uboot system design and transplantation. The design of the root file system, the design of terminal friendly graphical operation interface .3.completed the LED lamp AD conversion, alarm, air conditioning, exhaust fan hardware driver module, control service program design. The system clock display CPU frequency, free memory, disk remaining space parameters are obtained. The interface of PC remote landing intelligent terminal is designed. The remote login function. 4. The intelligent terminal controls the switch of indoor LED lamp, collects and adjusts the temperature of PM2.5 value, the video monitoring function and the debugging of each function module.
【學位授予單位】：南京林業大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TU855

【參考文獻】

相關期刊論文 前1條

1 鄧燕妮;定明R，

本文編號：1433236