本文關鍵詞：電力工程流程管理軟件開發　出處：《電子科技大學》2014年碩士論文　論文類型：學位論文

  更多相關文章： 電力工程 流程管理 J2EE JBPM 項目管理

【摘要】：現代化的電力工程項目面臨著缺乏科學管理的現實。電力工程項目是資金密集、工期緊張、質量要求特別嚴格的工程項目,而長期的實踐證明,缺乏科學合理的項目管理方法,沒有有效的軟件系統的技術支撐,電力工程項目的實施困難重重,項目進度難以把控,成本不斷增加,質量事故頻出。在電力工程項目中引入現代化的流程管理方法,有利于促進電力工程項目的順利高效實施。而基于現代化的流程管理方法實現的流程管理軟件,能夠?yàn)殡娏こ添?xiàng)目的順利進行提供有力的信息化保障。本文在針對電力工程項目自身特點進行分析基礎上,提出了應用于電力工程項目的流程管理體系和方法,并以此為理論基礎,進行了電力工程項目流程管理的開發和分析,為實現現代化電力工程項目流程管理提供了技術基礎。本文研究和分析了現代電力工程項目實施中的若干問題,提出了在項目實施中采用流程管理方法的必要性和可行性;研究和分析了流程管理的一般性方法,對流程管理的理論基礎進行了詳細論述;研究和分析了流程管理軟件的設計方法和原理,對核心的工作流技術、流程引擎技術進行了深入的分析;研究和分析了應用于電力工程項目的流程管理軟件的設計路線,針對重要的進度控制、成本控制、和質量管理環節,分別進行了流程建模和定義。本文通過以上內容研究,基于J2EE技術,利用JBPM流程引擎進行了流程系統的設計,測試驗證,系統部署,實現了電力工程流程管理軟件的系統應用。為電力工程流程管理提供了一種可行、高效以及具備嚴格質量控制的流程軟件,解決電力工程無規范流程、管理和執行效率低的現狀。
[Abstract]:Modern electric power engineering projects are faced with the reality of lack of scientific management. Power engineering projects are projects with intensive capital, tight construction period and strict quality requirements, which have been proved by long-term practice. Lack of scientific and reasonable project management methods, lack of effective software system technical support, power engineering project implementation difficulties, project progress is difficult to control, increasing costs. The introduction of modern process management methods in power engineering projects is conducive to the smooth and efficient implementation of power engineering projects, and the process management software based on the modern process management method. Can provide a strong information support for the smooth progress of power engineering projects. This paper analyzes the characteristics of power engineering projects on the basis of their own characteristics. The system and method of process management applied to power engineering project are put forward, and based on this theory, the development and analysis of process management of power engineering project are carried out. This paper studies and analyzes some problems in the implementation of modern power engineering projects. The necessity and feasibility of adopting the process management method in the project implementation are put forward. The general methods of process management are studied and analyzed, and the theoretical basis of process management is discussed in detail. The design method and principle of process management software are studied and analyzed, and the core workflow technology and process engine technology are deeply analyzed. This paper studies and analyzes the design route of process management software applied to power engineering projects, aiming at important progress control, cost control, and quality management links. Through the above research, based on J2EE technology, the JBPM process engine is used to design, test and deploy the process system. The system application of power engineering process management software is realized, which provides a feasible, efficient and strict quality control flow software for power engineering process management, and solves the problem of non-standard flow in power engineering. Management and implementation of inefficient status quo.
【學位授予單位】：電子科技大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TP311.52;F426.61
，

本文編號：1358162