【摘要】：隨著社會對小批量、多品種的柔性生產線的青睞,Job Shop作業車間越來越受到企業的重視,而物料配送作為車間生產過程中的關鍵環節自然而然也成為許多專家學者的研究方向,一個及時、準確、高效的物料配送方案既能夠保證生產過程的持續性和穩定性,也可以大幅提高生產效率,降低生產成本。針對當前物料配送存在的缺乏有效規劃、效率低、成本高等問題,本文重點從物料配送策略進行研究,從而實現對物料配送的優化。本文首先闡述課題的研究背景及意義,并通過物料配送模型與配送系統、實時控制方法和配送路徑優化三個方面介紹物料配送研究現狀。然后對物料配送的概念、特點、目標、構成因素以及求解方法進行闡述。根據作業車間時間窗限制、容量限制等約束條件,建立以最短配送路徑為目標的單任務型物料配送策略模型和多任務型物料配送策略模型,并設計相應的LINGO程序和自適應遺傳算法對其進行求解,從而得到經濟、實用的配送方案,對配送過程起到一定的指導作用。最后通過算例分析驗證模型及算法的合理性、有效性。
[Abstract]:With the favor of small batch and multi-variety flexible production line in society, Job Shop workshop has been paid more and more attention by enterprises, and material distribution, as the key link in workshop production process, has naturally become the research direction of many experts and scholars. A timely, accurate and efficient material distribution scheme can not only ensure the continuity and stability of the production process, but also greatly improve the production efficiency and reduce the production cost. In order to solve the problems of lack of effective planning, low efficiency and high cost of material distribution, this paper focuses on the research of material distribution strategy, so as to realize the optimization of material distribution. In this paper, the research background and significance of the subject are described, and the research status of material distribution is introduced from three aspects: material distribution model and distribution system, real-time control method and distribution path optimization. Then the concept, characteristics, objectives, constituent factors and solving methods of material distribution are described. According to the constraints such as time window limitation and capacity limitation of job shop, the single task material distribution strategy model and multi task material distribution strategy model aiming at the shortest distribution path are established, and the corresponding LINGO program and adaptive genetic algorithm are designed to solve them, so as to obtain an economical and practical distribution scheme, which plays a certain guiding role in the distribution process. Finally, an example is given to verify the rationality and effectiveness of the model and algorithm.
【學位授予單位】：合肥工業大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：F252.1

【參考文獻】

相關期刊論文 前10條

1 劉旭;樓佩煌;錢曉明;武星;;基于改進遺傳算法的物料配送多AGV調度優化[J];機械設計與制造工程;2015年03期

2 王超;穆東;;物料配送和廢舊產品回收的VRPSDP問題的并行模擬退火算法[J];北京交通大學學報;2014年06期

3 李彥超;涂南;;基于直送看板的混流裝配線物料配送規劃與應用[J];物流技術;2014年05期

4 莫太平;王丹;張明志;;基于單片機的物料索取系統設計及實現[J];測控技術;2014年01期

5 沈維蕾;馬鵬輝;;基于MES的混流裝配線物料配送方法研究[J];合肥工業大學學報(自然科學版);2013年10期

6 何小鋒;馬良;;帶時間窗車輛路徑問題的量子蟻群算法[J];系統工程理論與實踐;2013年05期

7 高貴兵;張紅波;張道兵;岳文輝;;混流制造車間物料配送路徑優化[J];計算機工程與應用;2014年15期

8 葛茂根;劉明周;錢芳;扈靜;蔣增強;張銘鑫;;基于JIT的多目標總裝準時物料配送方法研究[J];中國機械工程;2011年23期

9 周金平;;混流裝配線物料配送仿真與優化[J];機電工程技術;2011年08期

10 唐中燕;;基于PLC通信網絡的物料呼叫系統設計[J];制造業自動化;2011年07期

，

本文編號：2500674