發布時間：2018-03-31 07:03

  本文選題：大行程筒式鉛剪切阻尼器　切入點：耗能減震　出處：《工程抗震與加固改造》2017年06期

【摘要】：提出了一種大行程筒式鉛剪切阻尼器,闡述了其基本構造及耗能原理。使用ABAQUS建立該阻尼器的實體模型,模擬其滯回特性,分析了阻尼器的四個設計參數對其耗能性能的影響,為設計提供參考。通過低周往復荷載試驗,研究該阻尼器的滯回耗能性能。有限元分析和性能試驗結果表明:該阻尼器的阻尼力與鉛槽長度、軸徑成線性關系,鉛槽長度和軸徑可作為阻尼器設計中提高阻尼力的穩定參數;鉛槽厚度對阻尼器的擠壓作用影響大,摩擦段長度對阻尼力中的摩擦力影響大,為提供穩定的阻尼力,在阻尼器的設計中,鉛槽厚度與鉛槽長度比值應小于0.25,摩擦段長度取阻尼器行程;阻尼器耗能能力較好,耗能性能穩定,能夠滿足結構耗能減震要求。
[Abstract]:In this paper, a large stroke cylinder type lead shear damper is proposed, and its basic structure and energy dissipation principle are expounded. The solid model of the damper is established by using ABAQUS, its hysteretic characteristics are simulated, and the influence of four design parameters of the damper on its energy dissipation performance is analyzed. The hysteretic energy dissipation performance of the damper is studied by low-cycle reciprocating load test. The results of finite element analysis and performance test show that the damping force of the damper is linearly related to the length and axis diameter of lead tank. The length and axis diameter of lead tank can be used as stability parameters to increase damping force in damper design, the thickness of lead tank has great influence on the extrusion of damper, and the length of friction section has great influence on friction force in damping force, so as to provide stable damping force. In the design of damper, the ratio of lead tank thickness to lead tank length should be less than 0.25, and the length of friction section should be taken as damper stroke.
【作者單位】： 北京工業大學工程抗震與結構診治北京市重點試驗室;
【基金】：國家自然科學基金資助項目(51378039,51421005、91315301-03)
【分類號】：TU352.1

【相似文獻】

相關期刊論文 前10條

1 R. I. Skinner;史金納;R. G. Tjler;戴勒;A. J. Heine;海尼;W. H. Robinson;羅賓遜;嚴竹平;;用于結構抗震的滯忯阻尼器[J];工程抗震;1980年03期

2 楊國華,李愛群,程文p<;結構控震設計中流體阻尼器的指數選擇與控制系統設計[J];工業建筑;2003年06期

3 鄔U喕，

本文編號：1689649