本文關鍵詞： 生產物流 設施規劃 層次分析法 仿真模擬　出處：《長春理工大學》2015年碩士論文　論文類型：學位論文

【摘要】：本文以A汽車輪胎制造企業為主要的研究對象,由于A企業要投資新建工廠,所以要用國內外普遍認可的系統設施規劃布置方法就是系統設施布置(SLP)的方法,構建企業相關設施模型,通過對輪胎生產加工制造的整個工藝流程的了解,確定各個作業單位之間的相互物流關系,計算與分析出相關設施的位置相關圖與面積相關圖,合理的分析出各個生產車間的布置位置情況,得出比較合理的布置方案,然后運用系統評價方法中的層次分析法,之后構建相關的遞階層次結構,構造對應的判斷矩陣,通過公式進行計算,最后得到最精確最合理的布置方案。基于Flexsim系統仿真軟件對該方案進行相應的仿真模擬分析,主要是為了驗證運用AHP法得出的最佳設備布置方案組織的生產工藝流程是否滿足生產要求,確定規劃中是否存在瓶頸,仿真之后找到相應的解決辦法,確保物流通暢。
[Abstract]:This paper takes A automobile tire manufacturing enterprise as the main research object, because A enterprise wants to invest in the new factory, so must use the system facility layout method which is generally accepted at home and abroad is the system facility layout / SLP method. Through the understanding of the whole technological process of tire production and manufacturing, the mutual logistics relationship between each operation unit is determined, and the location correlation map and area correlation map of the related facilities are calculated and analyzed. Reasonable analysis of the location of each production workshop, a more reasonable layout scheme, and then use the analytic hierarchy process in the system evaluation method, and then build the related hierarchical structure, construct the corresponding judgment matrix, Through the formula calculation, the most accurate and reasonable layout scheme is obtained. The corresponding simulation analysis of the scheme is carried out based on the Flexsim system simulation software. The main purpose of this paper is to verify whether the production process flow of the best equipment layout scheme based on AHP method meets the production requirements, to determine whether there are bottlenecks in the planning, and to find the corresponding solution after simulation to ensure the smooth flow of goods.
【學位授予單位】：長春理工大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：F252;F426.72

【參考文獻】

相關期刊論文 前1條

1 沙洪洲,郭果敢;馬爾可夫鏈用于倉儲建模與仿真[J];計算機仿真;2005年04期

，

本文編號：1503764