本文關鍵詞：政府激勵規制及WTP差異下再制造模式的博弈分析　出處：《重慶交通大學》2013年碩士論文　論文類型：學位論文

  更多相關文章： 企業社會責任評價 WTP差異 政府激勵規制 再制造模式 動態博弈

【摘要】：廢舊物品再制造不僅可以優化資源配置，節約能源，降低成本，也可促進社會可持續發展，實現“環境與經濟”的綜合效益。再制造行業中政府如何判斷是否對初期進入再制造市場的企業采取激勵規制措施，，制造商如何在政府不同的激勵規制措施和消費者對新產品和再制造產品支付意愿存在差異情況下決策再制造模式顯得尤其重要。 首先在分析國內外再制造行業現狀以及我國政府激勵規制現狀的基礎上，結合現有的研究成果，從經濟責任、法律責任、道德責任、環境責任、慈善責任五個角度出發構建企業社會責任評價CSR(Corporate Social Responsibility)指標體系供政府判斷是否對制造商采取激勵規制措施。 其次，將再制造行業的發展分為萌芽期、成長期和成熟期三個階段，政府分別對各發展階段進行補貼、補貼或征收費用和征收費用。接著考慮政府不同激勵規制措施及消費者對新產品和再制造產品存在WTP(Willing to Pay)差異的情況，構建再制造模式動態博弈模型。在制造商領導的單一供應商單一零售商閉環供應鏈中按照政府激勵規制的對象不同分別建立12個博弈模型，并運用逆向歸納法求解和分析得出制造商在再制造行業各發展階段的最優決策。 最后，通過算例來支撐本文的研究成果。結果表明企業社會責任評價體系可以應用到具體案例中，可供政府參考使用；同時也佐證了再制造行業各階段政府不同激勵規制措施及WTP差異下再制造博弈分析結果的正確性。
[Abstract]:The remanufacture of waste goods can not only optimize the allocation of resources, save energy, reduce costs, but also promote the sustainable development of society. To realize the comprehensive benefit of "environment and economy". How to judge whether the government should take the incentive regulation measures to the enterprises that enter the remanufacturing market in the initial stage in the remanufacturing industry. It is particularly important for manufacturers to make decisions on remanufacturing models under the circumstances of different government incentives and regulations and consumers' willingness to pay for new products and remanufactured products. First of all, on the basis of analyzing the domestic and foreign remanufacturing industry and the current situation of our government incentive regulation, combined with the existing research results, from economic responsibility, legal responsibility, moral responsibility, environmental responsibility. Constructing CSR(Corporate Social response from five aspects of Charitable responsibility). The index system is for the government to judge whether to take the incentive regulation measures to the manufacturer. Secondly, the development of the remanufacturing industry is divided into three stages: the budding stage, the growing stage and the mature stage, and the government subsidizes each stage of development respectively. Subsidy or levy fee and levy fee. Then consider the different government incentives and regulations and consumer WTP(Willing to pay for new products and remanufactured products. In the closed-loop supply chain of single supplier and single retailer led by manufacturer, 12 game models are established according to the different objects of government incentive regulation. The reverse induction method is used to solve and analyze the optimal decision of the manufacturer in each stage of the development of the remanufacturing industry. Finally, through the example to support the research results, the results show that the corporate social responsibility evaluation system can be applied to specific cases, can be used for reference by the government; At the same time, it also proves the correctness of the remanufacturing game analysis under the different government incentive and regulation measures and the WTP difference in each stage of the remanufacturing industry.
【學位授予單位】：重慶交通大學
【學位級別】：碩士
【學位授予年份】：2013
【分類號】：F812.45;F270;F425

【參考文獻】

相關期刊論文 前10條

1 徐濱士,梁秀兵,李仁涵;綠色再制造工程的進展[J];中國表面工程;2001年02期

2 丁雪峰;謝五洲;郭成恒;;有限產能條件下再制造最優定價及產能調整策略[J];重慶理工大學學報(社會科學);2010年05期

3 關啟亮;周根貴;曹柬;;具有政府回收約束的閉環供應鏈回收再制造決策模型[J];工業工程;2009年05期

4 熊中楷;黃德斌;熊榆;;政府獎勵條件下基于再制造的閉環供應鏈模式[J];工業工程;2011年02期

5 王文賓;達慶利;;再制造逆向供應鏈協調的獎勵、懲罰及獎懲機制比較[J];管理工程學報;2010年04期

6 聶佳佳;王文賓;吳慶;;獎懲機制對零售商負責回收閉環供應鏈的影響[J];工業工程與管理;2011年02期

7 郭軍華;;WTP差異化條件下再制造閉環供應鏈的協調定價策略[J];華東交通大學學報;2012年01期

8 汪翼;孫林巖;楊洪焦;李剛;;不同回收法律下的再制造供應鏈決策與合作研究[J];管理科學;2009年01期

9 徐濱士;劉世參;;發展裝備再制造工程 促進循環經濟建設[J];建設機械技術與管理;2006年01期

10 黃祖慶;達慶利;;直線型再制造供應鏈決策結構的效率分析[J];管理科學學報;2006年04期

相關博士學位論文 前2條

1 宮艷雪;不確定條件下閉環供應鏈管理若干問題的研究[D];華東理工大學;2011年

2 付小勇;廢舊電子產品回收處理中的博弈模型研究[D];大連理工大學;2012年

本文編號：1423718