【摘要】：隨著技術的迅速發展和市場競爭的愈發激烈,產品設計和開發的方式各不相同,僅僅符合產品使用功能遠不能滿足消費者的需求,能夠了解消費者的產品喜好以及幫助他們建立更加愉悅的產品造型是設計師和制造商面臨的新挑戰。對此,產品的造型在調動消費者情感上占據了非常重要的地位。關于產品造型及意象的研究,也受到了國內外學者的普遍關注。 本研究以意象產品形態出發,分析了消費者對于產品造型形態所形成的感性意象,運用球面調和映射的分析方法,提出了一種豐富產品形態的新方法。本研究一共包含三個階段： 第一,運用感性工學方法提取樣本及感性意象,并利用主成分分析法建立消費者感性意象與產品三維形態之間的關聯程度,創建樣本意象尺度分布圖,確定實驗樣本形態； 第二,采用三維工程軟件對確定的樣本進行三維模型的建立,對其進行三角網格劃分,提取網格化模型的表面數據結構,運用球面調和映射的分析方法對網格化的三維模型表面進行球面參數化,使之生成球面嵌入體模型,并對球面參數化數據進行提��； 第三,運用得到的球面嵌入體模型,建立兩種不同產品三維形態表面上各個點的對應關系,利用線性插值方法得到更多的融合產品形態,設計計算機圖形用戶界面對融合產品的三維形態進行展示,分析融合產品形態所包含的意象,對本研究的創新點進行論證。 選取兩個不同形態的汽車車身模型為實例進行研究,結果表明該方法對于產品形態的融合具有很好的適用性,在計算機輔助產品形態造型設計中將具有良好的應用前景。
[Abstract]:With the rapid development of technology and the increasingly fierce market competition, the ways of product design and development are different. It is a new challenge for designers and manufacturers to understand consumers' product preferences and help them to establish more pleasant product modeling, which can only meet the needs of consumers. In this regard, the product modeling in the mobilization of consumer emotion occupies a very important position. The research on product modeling and image has also been widely concerned by scholars at home and abroad. Based on the image product form, this paper analyzes the perceptual image formed by consumers' product modeling form, and puts forward a new method to enrich the product form by using the analysis method of spherical harmonic mapping. This study consists of three stages: first, the perceptual engineering method is used to extract samples and perceptual images, and the principal component analysis is used to establish the correlation degree between consumer perceptual images and three-dimensional morphology of products, and the scale distribution map of sample images is created to determine the experimental sample morphology. Secondly, the 3D model of the determined sample is established by using 3D engineering software, and the surface data structure of the gridding model is extracted, and the spherical inlay model is generated by using the spherical harmonic mapping analysis method to generate the spherical inlay model and extract the spherical parametric data. Thirdly, the corresponding relationship of each point on the surface of two different products is established by using the spherical embedded body model, more fusion product forms are obtained by using linear interpolation method, the computer graphic user interface is designed to display the three-dimensional shape of the fusion product, the images contained in the fusion product form are analyzed, and the innovation points of this study are demonstrated. Two automobile body models with different shapes are selected as examples to study. The results show that this method has good applicability to the fusion of product morphology and will have a good application prospect in computer aided product shape modeling design.
【學位授予單位】：蘭州理工大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TB472

【參考文獻】

相關期刊論文 前10條

1 袁浩;薛澄歧;盧章平;畢偉;;基于局部形態融合的產品創新設計研究[J];包裝工程;2011年20期

2 蘇建寧,李鶴歧,李奮強;產品設計中的感性意象定位研究[J];蘭州理工大學學報;2004年02期

3 巴黎;;基于格式塔心理的手機造型表達[J];廣西輕工業;2010年10期

4 繆永偉,王章野,肖春霞,馮結青,彭群生;點模型曲面的調和映射參數化[J];計算機輔助設計與圖形學學報;2004年10期

5 黃武;姚淑波;關勝亮;夏時洪;;利用控制線段的實時圖像變形方法[J];計算機輔助設計與圖形學學報;2010年12期

6 王守覺;梁先揚;;圖像變形計算方法及其應用[J];計算機輔助設計與圖形學學報;2011年08期

7 李永鋒;;基于數量化理論Ⅰ的產品意象造型設計研究[J];機械設計;2010年04期

8 朱斌,江平宇,蘇建寧;一種基于感性設計的產品平臺參數的辨識方法研究[J];機械工程學報;2004年02期

9 蘇建寧,李鶴岐;基于感性意象的產品造型設計方法研究[J];機械工程學報;2004年04期

10 羅仕鑒,朱上上;用戶和設計師的產品造型感知意象[J];機械工程學報;2005年10期

，

本文編號：2504319