【摘要】：目的研究裙座與鞍座2種連接結構的罐式集裝箱在長側面跌落情況下的應力狀態以及結構薄弱點。方法基于有限元軟件對2種結構的罐式集裝箱進行仿真模擬分析,制作2種結構的罐式集裝箱試件,并進行2.8 m高度的跌落試驗,對比分析仿真模擬結果與試驗分析結果。結果端梁發生了屈服變形,罐體與框架連接處結構承受了較大應力,并發生損壞。結論試驗與仿真模擬結果基本一致,為罐式集裝箱改進設計提供了理論依據。
[Abstract]:Aim to study the stress state and structural weakness of tank container with two connecting structures of skirt and saddle under the condition of long side drop. Methods based on the finite element software, the two kinds of tank containers were simulated and analyzed, and two kinds of tank container specimens were made. The drop test of 2.8 m height was carried out, and the simulation results and the test results were compared and analyzed. Results the yield deformation of the end beam occurred, the structure at the junction between the tank and the frame was subjected to great stress, and the structure was damaged. Conclusion the experimental results are consistent with the simulation results, which provide a theoretical basis for the improvement of tank container design.
【作者單位】： 北京化工大學;交通運輸部水運科學研究院;
【基金】：國家科技支撐計劃(2015BAG20B03)
【分類號】：TB485.3

【相似文獻】

相關期刊論文 前3條

1 馬鈞;孟慶國;羅永欣;;罐式集裝箱流固耦合沖擊響應譜分析計算[J];計算機輔助工程;2013年01期

2 陳偉超;;淺析不銹鋼罐式集裝箱的檢驗要點[J];機電工程技術;2011年07期

3 ;[J];;年期

，

本文編號：2471644