【摘要】：采用DOE實驗設計方法,對制備電容器用鈮粉的酸洗除雜工藝進行研究,確定了影響鈮粉性能的關鍵因素是酸洗除雜工藝使用酸的濃度和酸洗時間。通過關鍵因素的全因子正交試驗,對產品質量和工藝參數進行量化分析,確定最佳的酸洗工藝,可有效減低和控制電容器級鈮粉中的主要C、O非金屬及Fe、Ni、Cr金屬雜質含量,降低電容器級鈮粉的漏電流和損耗,提高電容器級鈮粉的性能。
[Abstract]:The acid pickling process for the preparation of niobium powder for capacitors was studied by means of DOE experimental design. The key factors affecting the performance of niobium powder were the concentration of acid and the pickling time. By means of the all-factor orthogonal test of the key factors, the product quality and technological parameters were analyzed quantitatively, and the optimum pickling process was determined, which can effectively reduce and control the main metal impurities in the condenser grade niobium powder, such as Con O nonmetal and Fe,Ni,Cr metal impurity. The leakage current and loss of capacitor grade niobium powder are reduced, and the performance of capacitor grade niobium powder is improved.
【作者單位】： 寧夏東方鉭業股份有限公司;
【基金】：國家科技支撐計劃資助項目(2011BAE24B01)
【分類號】：TF123.24

【相似文獻】

相關期刊論文 前4條

1 銀祖學;;提高海綿鎘品位的酸洗工藝[J];廣西輕工業;2007年11期

2 周海紅,余永峰;摻雜藍鎢不酸洗工藝的研究[J];粉末冶金工業;2002年04期

3 紀碰輝;;利用硫酸和磷肥的廢水滲產普鈣[J];化學工程與裝備;1993年01期

4 鄭亞波;陳戰乾;陳峰;喬璐;張健;;基于DOE優化大規格鈦及鈦合金鑄錠補縮工藝[J];中國鈦業;2012年03期

，

本文編號：2267301