本文選題：電磁學 + 角振動臺��； 參考：《兵工學報》2017年01期

【摘要】：針對有限元法求解氣隙磁場的磁路幾何模型占用內存空間多和計算時間長等問題,提出一種基于等效磁化強度法求解電磁式角振動臺氣隙磁場分析方法�；诘刃Т呕瘡姸确ń⑹噶看盼坏奈⒎址匠探M,得到包含磁路幾何參數的磁感應強度解析表達式;與有限元法計算結果對比,驗證等效磁化強度法的正確性;采用等效磁化強度法對磁路參數進行優化。分析結果表明:當氣隙厚度保持不變時,隨著永磁體扇形角的增加,氣隙中有效均勻磁感應強度的區域變寬,而隨永磁體厚度的增加,氣隙磁感應強度將增強;當永磁體扇形角和厚度保持不變時,磁感應強度隨氣隙厚度的增加而減小。該方法可以快速分析磁路結構參數變化對氣隙磁感應強度的影響程度,為優化設計電磁式角振動臺磁路結構提供理論參考。
[Abstract]:In order to solve the problems of the magnetic path geometry model of air gap magnetic field using finite element method, a method based on the equivalent magnetization method is proposed to solve the magnetic field analysis of the air gap of the electromagnetic angular vibration table. The differential equations of vector magnetic potential are established based on the equivalent magnetization method, and the analytical expression of magnetic induction intensity including the geometric parameters of the magnetic circuit is obtained, and the validity of the equivalent magnetization method is verified by comparing the calculated results with the finite element method. The equivalent magnetization method is used to optimize the magnetic circuit parameters. The results show that when the thickness of the air gap remains constant, the effective and uniform magnetic induction intensity in the air gap becomes wider with the increase of the fan angle of the permanent magnet, but with the increase of the thickness of the permanent magnet, the intensity of the air gap magnetic induction will increase. When the fan angle and thickness of the permanent magnet remain constant, the magnetic induction intensity decreases with the increase of the air gap thickness. This method can rapidly analyze the influence of the change of magnetic circuit structure parameters on the magnetic induction intensity of air gap and provide a theoretical reference for the optimization design of magnetic circuit structure of electromagnetic angular vibration table.
【作者單位】： 中國計量大學工業與商貿計量技術研究所;浙江大學機械工程學院浙江省先進制造技術重點實驗室;
【基金】：國家自然科學基金項目(51375443) 國家重大儀器設備開發專項項目(2013YQ470765) 浙江省自然科學基金杰出青年基金項目(LR12E05001) 浙江省先進制造技術重點實驗室開放基金項目(2016KF05)
【分類號】：TB534.2

【參考文獻】

相關期刊論文 前4條

1 趙精晶;石庚辰;杜琳;;盤式永磁微型發電機的磁路設計方法[J];兵工學報;2014年08期

2 葛研軍;聶重陽;辛強;;調制式永磁齒輪氣隙磁場及轉矩分析計算[J];機械工程學報;2012年11期

3 劉曉;葉云岳;鄭灼;盧琴芬;;空心式永磁直線伺服電機氣隙磁場及推力分析[J];浙江大學學報(工學版);2010年03期

4 劉曉;葉云岳;鄭灼;盧琴芬;;永磁直線伺服電機的磁場分析及優化設計[J];浙江大學學報(工學版);2008年11期

【共引文獻】

相關期刊論文 前10條

1 郝偉娜;周俊;;基于Halbach排列的擺線永磁齒輪[J];機械強度;2017年01期

2 葛研軍;袁直;賈峰;楊均悅;周凱凱;;籠型異步磁力耦合器機械特性與試驗[J];農業工程學報;2016年12期

3 葛研軍;胡浩;王s，

本文編號：2103110