本文選題：故障診斷 + 規則提取�。� 參考：《機床與液壓》2017年17期

【摘要】：針對在少故障樣本情況下,建立狀態識別決策表時數據離散化的閾值難以確定的問題,提出了將系統正常工作時狀態參數變化區間的邊界值作為狀態參數離散化閾值來建立液壓系統故障識別決策表,以此處理某型翻車機液壓系統故障識別問題。應用粗糙集理論對建立的決策表進行屬性約簡,得到系統故障診斷的簡化規則,并將這些規則存入故障診斷專家系統的知識庫中用于系統故障識別。專家系統的現場診斷結果表明,應用該方法提取的故障診斷規則具有較高的魯棒性。
[Abstract]:In the case of few fault samples, it is difficult to determine the threshold of data discretization when establishing the decision table of state recognition. In this paper, a fault identification decision table of hydraulic system is established by taking the boundary value of the variation interval of state parameters as the discrete threshold of state parameters to deal with the problem of fault identification of hydraulic system of a certain type of dumper. Rough set theory is applied to attribute reduction of the decision table, and the simplified rules of fault diagnosis are obtained, and these rules are stored in the knowledge base of fault diagnosis expert system for system fault identification. The field diagnosis results of the expert system show that the fault diagnosis rules extracted by this method are robust.
【作者單位】： 燕山大學河北省重型機械流體動力傳輸與控制實驗室;燕山大學先進鍛壓成形技術與科學教育部重點實驗室;
【分類號】：TH137;TH237.3;TP18

【相似文獻】

相關期刊論文 前1條

1 胡浩;魯玉軍;蔡江濤;駱華武;汪];;基于服務決策表的產品配置規則研究[J];中國機械工程;2012年21期

，

本文編號：1866742