本文選題：晶體塑性 + 含鍍層薄膜��； 參考：《中國科技論文》2017年10期

【摘要】：為了研究界面與位錯相互作用對材料塑性行為的影響,建立了基于位錯機制的晶體塑性理論。通過引入描述位錯運動的微觀平衡方程和幾何必需位錯對塑性變形的2種硬化機制,模擬了含鍍層薄膜中的尺寸效應和包辛格效應。結果表明:鍍層會引起附近位錯的塞積,塞積的位錯會增強硬化從而產生尺寸效應,并且在卸載過程中不均勻的應力分布會使得局部較早地產生反向塑性變形,引起包辛格效應。另一方面,通過將應力-應變曲線與實驗結果對比發現,硬化主要是由位錯相互作用產生的背應力引起的而不是滑移阻力。
[Abstract]:In order to study the effect of interface and dislocation interaction on the plastic behavior of materials, the crystal plasticity theory based on dislocation mechanism is established. By introducing the micro equilibrium equation describing dislocation motion and the 2 hardening mechanisms of the geometric necessary dislocation to the plastic deformation, the size effect and Basinger effect in the film containing the coating are simulated. The deposit will cause the accumulation of the dislocation in the vicinity, the dislocation of the plug will increase the hardening and thus produce the size effect, and the uneven stress distribution in the unloading process will cause the local reverse plastic deformation early to cause the Basinger effect. On the other hand, by comparing the stress stress curve to the experimental results, it is found that the hardening is mainly caused by the experimental results. Dislocation interaction produces back stress rather than slip resistance.

【作者單位】： 清華大學航天航空學院;
【基金】：高等學校博士學科點專項科研基金資助項目(20130002120014)
【分類號】：TB383.2

【相似文獻】

相關期刊論文 前1條

1 李文方，，蒙繼龍，杜善義;晶須增強金屬基復合材料的包辛格效應[J];復合材料學報;1996年02期

本文編號：1805470