發布時間：2018-04-05 09:12

  本文選題：非石棉密封墊片　切入點：膠乳　出處：《中國膠粘劑》2017年03期

【摘要】：在丁腈橡膠(NBR)乳膠中引入丁苯橡膠(SBR)膠乳作為彈性黏合劑,制備了多個新型無石棉膠乳密封墊片,并著重探討了不同混合膠乳質量比對該密封墊片壓縮率、回彈率和拉伸強度的影響。研究結果表明:在滿足密封墊片性能要求和降低產品成本的前提下,得到了較理想的SBR膠乳/NBR膠乳質量比為6.4∶9.6和4.8∶11.2;同時,利用回歸模型對混合SBR膠乳/NBR膠乳體系的性能進行了預測,所得預測值與實測值較為接近,說明該回歸模型在預測密封墊片壓縮率、回彈率和拉伸強度方面是有效的。
[Abstract]:A new type of asbestos - free latex gasket was prepared by the introduction of SBR latex into nitrile rubber ( NBR ) latex as elastic adhesive . The influence of the mass ratio of different mixed latex on the compression rate , rebound rate and tensile strength of SBR latex / NBR latex was discussed . The results show that the performance of SBR latex / NBR latex is 6.4 鈭，

本文編號：1714121