本文關鍵詞：基于BIM技術的建筑成本預算軟件系統模型研究，由筆耕文化傳播整理發布。

文獻要素

摘要：選擇基于Revit軟件的ODBC開發方法，通過分析并改進Revit軟件中工程量計算規則，建立構件屬性與插件的數據映射，開發附加在Revit2013上的算量插件，能夠輸出符合清單規則的構件工程量；通過論證BIM設計軟件輸出清單量的可行性，有利于設計與造價BIM信息的對接和互用。

關鍵詞：BIM；Revit；工程量計算；插件

Abstract：This paper adopts an ODBC approach in the Revit 2013 as a possible way to overcome the above difficulty. First，measurement rules of construction bill quantities of Revit 2013 has been carefully studied and then modified to meet the requirements of “Code of Valuation with Bill Quantity of Construction Works（GB50500-2013）”. After establishing a mapping between construction work attributes and the ODBC keywords，a plug-in in Revit 2013 has been developed to identify and measure construction work volumes and cost relative information to output a BOQ. Thus it has been approved feasible that a BIM design software could be able to provide compliant BOQ with the Chinese regulations，which significantly helps building information interface and interoperate between designers and cost estimators.

Keywords：BIM；Revit；bill quantity of construction works；ODBC plug-in

參考文獻

[1]婁喆.基于BIM技術的建筑成本預算軟件系統模型研究[D].北京：清華大學，2009.

[2]趙紅紅，，李建成.信息化建筑設計——Autodesk Revit[M].北京：中國建筑工業出版社，2005.

[3]何關培.BIM與相關技術方法（十八）—BIM和造價管理[R]. 北京，2010.

建筑經濟，2015（04）：59-62

  本文關鍵詞：基于BIM技術的建筑成本預算軟件系統模型研究，由筆耕文化傳播整理發布。